The Indicator Tab - KEP MMI-1500 Installation & Operation Manual

7.2.3 The Indicator Tab

These are settings for the indicators shown on the Task Bar opposite to the Task Buttons.
Touch indicator: The Touch indicator
changes color every time a screen touch
is recognized. This allows the operator to
visually confirm that the touchscreen has
recognized the touch and is functioning
properly.
Attribute:
Enable makes the
Touch indicator
visible and active.
Disable makes the
indicator invisible and not active.
Non-configured area, Active area, and
Inactive area: Use these to set the
condition's color that is displayed in Touch
indicator.
Frame: Use to set the color of the circular
outline in the Touch indicator
CPU indicator: The CPU indicator is a
bargraph that shows system resource
usage. Typically, the bargraph increases as
more windows are open. Operators can tell if a
resource failure is imminent.
Attribute: Enables or disables this feature. If disabled, the CPU indicator is not displayed at run time.
Color: This dropdown is used to select the color of the displayed CPU indicator.
Alarm indicator: The Alarm indicator comes on when there are alarms present. This indicator is a bargraph that
increases as the number of alarms increases. Operators are alerted to active alarms.
Attribute: Enables or disables this feature. If disabled, the Alarm indicator is not displayed at run
time.
Color: This dropdown is used to select the color of the displayed Alarm indicator.
Sample Task Bar showing Indicators.
Note: The full range of colors is available for Indicator settings.
Touch CPU Alarm
37