Pds] Sharp Jw Series Ver1.0; Sharp Jw Series [Pds] - KEP MMI-1500 Installation & Operation Manual

Mmi-touchscreen series
Table of Contents

Advertisement

16.38 Sharp JW Series [PDS]

16.38.1 HMI Setting -- SharpJW.pds driver must be present
Communication parameters must be set the same as those of the PLC. The following settings are recommended.
Parameter
PLC Type
Serial I/F port
Baud rate
Parity
Data bits
Stop bits
HMI station No.
PLC station No.
Comm. delay (10msec) 0
16.38.2 PLC Setting
Communication parameters must be the same as those of the MMI. PLC ID number must match setting in MMI.
Compatible with:
Sharp JW Series: JW10, JW-32CV1, JW-32CV2, JW-32CV3
16.38.3 Wiring
16.38.3.1
Wiring for cable connections using Sharp JW Series CPUs with RS485 Screw Terminal ports.
KEP Part#: (Not Available) (D-Sub 9 Female Plug to Flying Leads Cable)
HMI PLC[RS-485]
1 RXD- / TXD-
2 RXD+ / TXD+
Note: Graphic representation may not reflect the actual appearance of the finished cable.
16.38.4 Device address
Bit/Word Type Address Format
B
R
oooo(o) octal
W
TC
ooo
W
DM
ooo
oooo
oooo
oooo
TC and DM addresses must be even numbers.
Recommended Setting Notes
SHARP JW Series [PDS
V1.00]
RS485 2W
19200
None
7
1
0
1
Connect to Sharp JW Series CPU General Purpose Communication Port
L2 RXD-
L1 RXD+
Shield
Earth Ground
Range
oooo: 0~1577
o: 0~7
ooo: 0~776
oooo: 0~776
oooo: 1000~1776
oooo: 2000~2776
oooo: 3000~3776
SharpJW.pds driver must be present in \drivers folder
Must match PLC port setting
Options: Odd, Even, None - Must match PLC port setting
Must match PLC port setting
Options: 1, 2 - Must match PLC port setting
Not used
Options: 0-255 - As per PLC setting, PLC default is 1
Request delay: 0~999 @10 milliseconds. Use when the PLC requires a
delay between requests. Not implemented in simulation mode.
PLC Mapping and Example
(A0000-A1577)
(B000-B0777)
(09000-09777)
(19000-19777)
(29000-29777)
(39000-39777)
285
R15777 is mapped to (A1577) bit 7
TC2 is mapped to (b0002~b0003)
D10 is mapped to (09010~09011)
D1006 is mapped to (19006~19007)
D2552 is mapped to (29552~29553)
D3776 is mapped to (39776~39777)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mmi-750Mmi-730Mmi-850

Table of Contents