Editing Stacked Objects - KEP MMI-1500 Installation & Operation Manual

9.3.2 Editing Stacked Objects

Sometimes several objects are placed on top of one another (overlapping or stacked). Selecting one of them for editing can
be a problem. To get to an object in a stack, click to highlight the top object.
If this is not the desired object, do one of the following to get to the object:
1. From the Edit menu, select the Select Next Object command.
2. Click on the Select tool to "tunnel" to the object that needs to be edited.
3. Right click on the object to bring up the Shortcut Menu. The bottom of the Shortcut Menu displays
the Object ID numbers. Select the number of the object to edit. Then, right click again and select
the Attribute menu item.
9.3.3 Editing Grouped Objects Attributes
To edit the attributes of objects that have been grouped click on the group or select multiple objects by dragging a rectangle
around them.
Note: The handles for object groups are displayed with the opposite color of regular handles.
Click on the Attribute tool. This action calls up the Address
dialog that allows you to select the object to edit. Highlight the
object and click on Setting ....
Note: Editing in this fashion only allows editing of the object's
"General" tab attributes. Drawing objects are not shown in the list
and cannot be edited in this fashion.
93