Reserved Retentive Word - KEP MMI-1500 Installation & Operation Manual

10.4.1 Reserved Retentive Word

RW Address Description
60000
Real Time Clock second
60001
Real Time Clock minute
60002
Real Time Clock hour
60003
Real Time Clock day
60004
Real Time Clock month
60005
Real Time Clock year
60006
Real Time Clock day of the week
NOTE about RTC:
When using "Objects" to display and change system time, the user must take care to enter only valid values.
For example: Seconds cannot be changed to 78(BCD), if 78 (BCD) is entered, the RTC continues counting 78 79 80 ...
etc. This causes unpredictable conditions to happen.
10.4.2 System Information
System Parameter mapping to recipe card information. When a project is downloaded to a unit and run for the first time,
System Parameters are stored in the System Reserved Memory area. The following is a list of the mapping relationship.
Parameters from the General Tab
RW System Parameter
60061
Back light saver
60064
Buzzer
Parameters from the Security Tab
RW System Parameter
60071
Security Control:
60072
Password: level 0
60074
Password: level 1
60076
Password: level 2
NOTE
BCD code, valid values: 0 - 59
(read/write allow)
BCD code, valid values: 0-59
(read/write allow)
BCD code, valid values: 0-23
(read/write allow)
BCD code, valid values: 0-31
(read/write allow)
BCD code, valid values: 0-11
(read/write allow)
BCD code, valid values: 0-9999
(read/write allow)
BCD code, valid values: 0-6
(read/write allow)
NOTE
0 (Disable)
1~255 second (Enable)
0:None
1:Yes
NOTE
0:None 1:Yes
two words
two words
two words
105
Version
Ver 1.2
Ver 1.2
Ver 1.2
Ver 1.2
Ver 1.2
Ver 1.2
Ver 1.2
Version
Ver 2.1
Ver 2.1
Version
Ver 2.1
Ver 2.1
Ver 2.`
Ver 2.`