Using Compact Flash To Transfer A Project - KEP MMI-1500 Installation & Operation Manual

12.3.2.2 Printing Object Assignments with EasyWindow
Select Print Window, Print Window Preview or Print Window to File from the menu. Select the Image radio button to
print the screen. Select the Table radio button to print a table of objects on the screen. Check the Alarm text box if you
would like active alarms printed with the Table. Click OK.

12.4 Using Compact Flash to transfer a project

Projects can be transferred to HMI units with Ethernet ports. These units have a compact flash slot that accepts
TM
CompactFlash memory cards. Projects are stored to the CompactFlash
inserted, then transferred to the units flash memory. This is convenient for sending project updates to remote locations and
customer sites. It also allows the project to be transferred to the unit without the need of a portable PC or other external
equipment.
12.4.1 Transferring a project to CompactFlash
1. Compile the project as usual. This generates a project file with the EOB extension.
2. Run the ImageCF.exe utility.
3. Use the ImageCF.exe utility to select the EOB file to convert to
TM
CompactFlash compatible format. This is done by clicking on
the magnifying glass button in the ImageCF dialog. By default,
a file named ImageCF.bin is created in the folder where the
ImageCF.exe utility is located.
4. Copy the ImageCF.bin to the CompactFlash
needed to do this. CompactFlash
Note: The CompactFlash
memory card a volume label.
12.4.2 Transferring a project from CompactFlash
1. Remove the CompactFlash
located.
2. Power down the HMI unit. Put dipswitch 2 of the unit in the up (on) position. Insert the CompactFlash
the units CompactFlash
3. Apply power to the MMI. The unit comes up in RDS mode. If the CompactFlash
displays a button with the letters "CF" on it in the lower right corner. Press this button to transfer the project from the
TM
CompactFlash
4. Once the screen stops scrolling text and indicates that the transfer is complete, remove power from the MMI. Put
dipswitch 2 back to the down (off) position, remove the CompactFlash
The transferred project is now the running application.
TM
TM
interfaces are available in most stores that sell computer hardware.
TM
memory card may be formatted as FAT16 or FAT32, do not give the CompactFlash
TM
card from the CompactFlash
TM
slot.
memory card to the unit's internal flash memory.
TM
memory cards, transported to the unit and
TM
memory
memory card. A CompactFlash
TM
to HMI
TM
interface and transport it to the site where the HMI is
117
TM
interface attached to your PC is
TM
card is detected the screen
TM
memory card and apply power to the unit.
TM
TM
card into