Creating A Project - KEP MMI-1500 Installation & Operation Manual

4. Select the Display Mode....
Landscape
5. Select the Language Mode....
This setting determines the character set that is used in project development.
Select Single Byte for European languages. These fonts are in the directory as Ascfont.8, Ascfont.16 and Ascfont.24.
These represent the 8, 16 and 24 point sizes. Larger sizes are generated from these base sizes (Example: Font size
32 is actually size 16 doubled).
Select Double Bytes for Asiatic languages. Use the Font setting in the System Parameters Editor Tab to select the
appropriate character set.
Then click, OK.

5.4 Creating a project

A project file (*.epj FILE) is simply a collection of all the windows and window data used by an application.
Step 1.
Select Edit|System Parameters... and the following screen appears. Fill in the system parameters. Use the PLC
Tab to select the set up the parameters for communicating to the PLC.
a. Select the PLC type from the dropdown list.
b. Confirm that the HMI Model is the one you
are programming.
c. Check the communications settings:
Serial I/F port
Baud rate
Data bits
Parity
Stop bits
HMI station No.
PLC station No.
Set the communications parameters to match
the PLC. (See the Controller Reference Guide
for details.)
Note:
The General, Indicator, Security, Editor,
Hardware and Auxiliary Port tabs are used for
other settings. See Section 2.0 for full details.
For a quick start, these settings can be left at
their defaults.
Portrait
21