The Hardware Tab - KEP MMI-1500 Installation & Operation Manual

Font: The font selection drop-down shows the selection of available fonts. Font selection is only used for Asiatic Languages.
Font selection does not affect Western Languages. The fixed font files in EasyBuilder are always used.
Note: The Font selection works in conjunction with the Option|Language menu's selection.
Option|Language: This setting determines the character set that is
used in project development.
Select Single Byte for European languages. Single Byte uses extended fonts (ALT key sequences) to type
characters used in some European countries. Single Byte uses the built in fonts. These fonts are in the directory as
Ascfont.8, Ascfont.16 and Ascfont.24. These represent the 8, 16 and 24 point sizes. Larger sizes are generated
from these base sizes (Example: Font size 32 is actually size 16 doubled).
Select Double Bytes for Asiatic languages. Use the Font setting in the System Parameters Editor Tab to select the
appropriate character set.
Note: The fixed western fonts can be edited using the EasyAsciiFontMaker editor included with the software. Use
EasyAsciiFontMaker to edit the Font files if a character is not found.

7.2.6 The Hardware Tab

Use the Hardware tab settings for configuring
TFT display characteristics, display orientation
and retentive memory use.
LCD
Display Mode:
Determines the orientation
of the project on the
display.
Landscape is for wide aspect
displays. The long edges of the
display are the top and bottom
of the windows. (Default)
Portrait gives a vertical orientation
to the project. The long edges of
the display are the left and right
sides.
TFT PCD Value: This setting applies to the
MMI1500T and MMI750T only. It allows the
user to change the PCD of the display. The
PCD is related to the scan frequency of LCD;
(the higher scan frequency, the more stable the
display).
Suggested use:
Set TFT PCD as High if there is no message board in the project.
Set TFT PCD as Low if there is a message board in the project.
40