Creating New Windows - KEP MMI-1500 Installation & Operation Manual

7.4.1 Creating New Windows

7.4.1.1 Procedure for Creating a New
Window Number
In the Window menu, select the Open
Window command.
In the Open Window dialog click on New
Window....
Select the window type; Base Window or
Fast Selection or Common Window.
Or ...
Setup the window properties as desired
Name: Give each window a unique name in order to
identify it. The name is shown in the Window Treebar.
Note: Window Names are not downloaded to the
MMI. Uploaded projects shows the default window
name.
Window No: This value can be changed if creating the
Window from the Open Window dialog. Valid window
numbers are from 10 to 1999 (1 to 1989 if starting
window is set to 1).
Note: The window number cannot be changed
after a window is created.
Start Pos.: Set the coordinates of the upper left-hand
corner of the window when displayed on the MMI. This
applies only if the window is less than a full screen.
Size: Set appropriate width and height if it is going to be a pop-up window, otherwise, set window width as full screen size
(320x240 or 640x480 depending on model)
Right click on an undefined window number in the Treebar
Select Create from the popup menu.
51