Side Panel Removal (Gen Iv - Typical) - Polaris Magnum 2x4 Service Manual

Side panel removal may be difficult until the locking
tabs and receivers have been snapped and un-
snapped a few times.
1. Remove seat. Grasp rear of side panel near rear
cab. With a quick and firm motion, pull the panel
forward and outward to disengage the two rear
tabs.
2. Place hand on top of side panel behind the fuel
tank. With a quick and firm motion, push down
on the side panel to disengage the top rear two
tabs. Then pull up on side panel to disengage
front upper and lower tab.
3. To reinstall side panel, align panel tabs with slots on
front cab. Push panel upward and forward until tabs
lock. Bend rear of side panel and insert the two tabs
into the rear cab.
Polaris Industries Inc. 5.7
BODY AND STEERING
Side Panel Removal (Gen IV - Typical)
Step 1.
Pull forward and out to disengage
two rear tabs.
Step 2.
Push down to disengage top rear
two tabs.
Step 3.
To reinstall, align panel tabs with
slots. Push upward and forward
until tabs lock.
7/96