Table of Contents
Advertisement
ELECTRICAL
Starter System
Starter Motor Removal (EH42PL, EH50PL)
CAUTION: Turn ignition switch
off
and disconnect the bat-
tery ground (-) cable from the battery before removing the
starter motor.
1.
Remove the two 6mm starter motor mounting bolts.
Note the position of the ground cable.
2.
Disconnect starter motor positive
(+)
cable at the motor.
3.
Remove starter motor.
4.
Inspect the O-Ring on the end of the starter motor for
wear, cracks, or damage. Replace if necessary.
Starter Motor Removal (EC38PL)
1.
Disconnect battery ground (-) cable.
2.
Remove components to gain access to recoil housing
(Le. chains, chain cover, body panels, etc.)
3.
Remove two starter bolts as shown.
4.
Remove rock guard from bottom of vehicle.
10/96
10.28
Remove
Rock Guard
Polaris Industries Inc.
Advertisement
Table of Contents
Troubleshooting
