Polaris Magnum 2x4 Service Manual page 494

Shaft Drive Transmission Disassembly, Cont.
15. Use a strap wrench on splines to hold shaft. Bend
lock tab away from front output ring gear retaining
bolt and remove bolt.
16. Remove front output ring gear. Inspect for broken,
chipped, or worn teeth.
17. Unscrew front drive output and protect threads with
electrical tape.
18. Slide seal off shaft and remove snap ring noting
shims and thickness.
Polaris Industries Inc.
8.27
TRANSMISSION SERVICE
Type IV, Shaft Drive Transmission
10/96