Front Drive Axle Installation - Polaris Magnum 2x4 Service Manual

7. Remove cotter pin and castle nut from lower A arm
ball joint. Remove lower A-arm from ball joint.
8. Using a drift punch remove roll pin at eccentric
housing.
Front Drive Axle Installation
1. Install spring washer and drive shaft. Align hole in
U-joint yoke with hole in eccentric shaft, and install
new roll pin.
2. Install new seal in strut casting.
3. Install drive shaft in strut.
4. Install lower ball joint, torque nut to 25 ft. Ibs. (3.45
kg-m) and install new cotter pin.
5. Follow procedure to install Hilliard clutch
components and hub as outlined on page 7.6.
Polaris Industries Inc. 7.17
FINAL DRIVE
Front Drive Axle
7/96