Side Seat Panels; Right Side Seat Panel Removal / Installation - Polaris ACE 900 2017 Service Manual

Table of Contents

Advertisement

SIDE SEAT PANELS

RIGHT SIDE SEAT PANEL REMOVAL /
INSTALLATION
WARNING
Procedure involves working with fuel tank. Do not
perform procedure around open flame or sparks. Do not
smoke.
1. Remove the seat.
2. Remove the engine compartment door panel.
3. Remove the right ROPS bolster.
q
4. Remove the screws
that attach the panel to the
rear cab and frame.
w
5. Remove the screw
from the front of the panel.
6. Remove the two plastic rivets
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
7. Clean the area around the fuel cap. Remove the fuel
Do not allow dirt or foreign material to fall into fuel tank.
8. Remove the side panel
e
.
Right Side Seat Panel Installation
Reverse the removal procedure to install the right side
seat panel.
cap. Pull the panel up far enough to clear the fuel
tank inlet. Reinstall the fuel cap.
NOTICE
When reinstalling the fuel cap, tighten to two clicks.
CAUTION
r
from the vehicle.
BODY / FRAME
10
10.21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ace 900 2018Ace 900 2019Ace 900 xc 2017

Table of Contents