Polaris Magnum 2x4 Service Manual page 149

ENGINE
EC25PF Engine
Recoil Assembly
The recoil cup is incorporated onto the flywheel.
1. If the recoil rope was removed or if a new rope is
being installed, attach one end of the rope to the
reel, pass the other end of the rope through the
guide in the reel housing and attach it to the rope
handle.
2. Install the rope housing over the reel.
3. Holding the flywheel housing with one hand, rotate
the rope housing clockwise until the rope is
completely re-wound.
4. Rotate the housing three more turns and install the
pawl return spring with the large end of the spring
going into rope housing; reinstall retainer plate,
lock washer and bolt.
5.
Check recoil and ratchet operation.
6. When reinstalling assembly onto engine, use
Loctite
515
Gasket Eliminator between the
flywheel housing and crankcase.
10/96
3.24
Polaris Industries Inc.