Polaris Magnum 2x4 Service Manual page 154

Disassembly, Cant.
17. Remove collar, O-ring, guide washer and
crankshaft gear (A). NOTE: A large screwdriver
may be used to aid removal.
18. Remove two bolts retaining the counter balance
bracket (8) using a 10 mm socket. CAUTION:
Make no attempt to remove the counterbalance
until steps 17 and 18 are complete, or damage
may result to the counterbalance assembly.
Reassembly Note:
Punch marks (C) on both gears
must be across from each other during reassembly.
See photo three at right.
19. Remove oil pump assembly (0).
20. Attach counterbalance puller onto counter
balance and position as shown in the picture at
right.
Reassembly Note:
The retainer bracket must be in
position on the counterbalance assembly before the
assembly is installed in the crankcase.
Polaris Industries Inc. 3.29
Crankshaft Gear
ENGINE
EC38PL Engine
7/96