Service Program Functions - Ricoh FT7060 Field Service Manual

12 July '86

2. Service Program Functions

NOTE: When in SP modes 1 though 12, the currently selected choice is shown in
reverse video. To activate the function select SET.
1-1
Triboelectrification (TRIB)
<Function>
<Operation>
<Remark>
1-2 First Misfeed Location (JADI)
<Function>
<Operation> One of the LEDs on the misfeed monitor blinks to indi-
1-3 Free Run (FREE)
<Function>
<Operation>
<Remark>
1-4 Beeper Off (BTOF)
<Function>
Turns on the Development motor to build up the static
charge on both the toner particles and the carrier.
Press the Start key to turn on the motors. Press the
Clear/Stop key to stop.
This function must be performed only after the machine
has reached a ready condition.
This function is automatically reset when the service
program mode is cancelled.
Locates the first copy paper misfeed.
cate the position.
Operates the machine without feeding paper for general
function checks, drum conditioning, etc.
Press the Start key to operate the machine and press
the Clear/Stop key to stop.
This function must be performed only after the machine
has reached a ready condition.
This function is automatically reset when the service
program mode is cancelled.
Disables the beeper at the user's request.
3-88