Blade Cleaner And Bias Roller Blade Replacement - Ricoh FT7060 Field Service Manual

27. Blade Cleaner and Bias Roller Blade Replacement

- Blade Cleaner -
1. Remove the blade assembly [A] (4 screws).
2. Remove the old blade cleaner [B] (2 screws).
3. Install the new blade cleaner.
properly.)
- Bias Roller Blade -
1. Remove the old bias roller blade [D] (2 screws).
2. Install the new bias roller blade.
Caution: When reassembling, make sure the bias roller blade [E] is inserted under
the bias roller [F].
(Make sure that the spring [C] is set
3-41
12 July '86