Image Density Sensor Cleaning And Removal - Ricoh FT7060 Field Service Manual

12 July '86

14. Image density Sensor Cleaning and Removal

2. Loosen the screw [A] securing the
3. Pull the image density sensor unit
- Cleaning -
a) Clean the image density sensor
b) Discharge any static electricity built up on the sensor during
cleaning. A clean finger will serve as a discharge medium.
- Unit Removal -
a) Disconnect the 6P connector [D].
b) Remove the bushing [E].
c) Remove the image density sensor unit.
image density sensor unit [B].
to release it.
[C] using a dry cloth.
3-28