Friction Roller Replacement - Ricoh FT7060 Field Service Manual

12 July '86

50. Friction Roller Replacement

1. Remove the duplex tray.
2. Remove the duplex handle (1 screw) and the duplex tray cover
(2 screws).
3. Unhook the friction roller pressure spring [A].
4. Remove the friction roller assembly [B] (2 screws).
5. Replace the friction rollers [C] (1 E-ring and 2 Allen screws).
6. Install the friction rollers. Position the rollers as shown.
7. Adjust the friction rollers. (Refer to adjustment table.)
(Refer to "Duplex Tray Removal".)
3-70