DUPLEX
47. Duplex Tray Removal
1.
Open the front doors and the top unit.
2.
Slide out the fusing unit and remove the transfer and transport unit
cover (2 screws).
3.
Remove the fusing unit cover (3 screws), and reset the fusing unit.
4.
Pull the duplex tray all the way out.
5.
Remove the two screws securing the duplex tray.
6.
Lift the front right side of the duplex tray to release the duplex tray
from the accuride rail, and pull the duplex tray out about 50 mm
ches).
Grasp the right side of the duplex tray and the support shaft [A].
7.
8.
Swing up the duplex tray in a counterclockwise direction and remove the
duplex tray.
3-67
12 July '86
in-
(2