Exposure; Scanner Drive Wire Replacement - Ricoh FT7060 Field Service Manual

EXPOSURE

7. Scanner Drive Wire Replacement

1. Remove the DF transport unit and feed-in unit. (Refer to "DF Removal"
in Section 5.)
2. Remove the top plate. (Refer to "Top Plate Removal".)
3. Remove the pre-quenching corona power pack with bracket [A] (1 screw
and 2 connectors) and the main switch (2 screws).
Remove the lens housing cover [B] (3 screws).
4.
5. Remove the optics cooling fan [C] (4 screws and 1 connector).
6. Loosen the Allen screw on the scanner drive pulley [D] and remove the
scanner motor [E] (2 shoulder screws and 2 connectors).
7. Loosen the two Allen screws [F] (front and rear) securing the wires to
the first scanner [G].
3-7
12 July '86