12 July '86
6. Paper Tray Drive Wire Replacement
1. Remove the paper tray unit. (Refer to "Paper Tray Removal.")
2. Remove the following parts:
a) Tray motor [A] (4 screws and 2 connectors).
b) Friction roller drive gear assembly [B] (3 screws).
c) Wire tensioning springs [C,D] (Front and rear).
3. Loosen the screw for the wire tension stopper [E] (Front and rear).
Wire End Bead Colors:
Front ----- Red
Rear ------ Blue
7-12