Table of Contents
Advertisement
SERVICE TOOLS
3. SERVICE TOOLS
3.1 SERVICE PROGRAM MODE
The service program (SP) mode is used to check electrical data and change
modes or adjustment values.
3.1.1 Access Procedure
[D]
[H]
[C]
[G]
1. Turn on the main switch.
2. Turn on DPS101-8 on the main board.
NOTE: The Call Service [A] and Add Toner [B] indicators will blink. This is
to confirm that the correct mode has been selected.
ON
1
2
3
[J]
[A]
4-14
31 December 1992
4
5
6
7
8
[I]
[B]
[E]
[F]
Advertisement
Table of Contents
