Lens Drive Wire Replacement - Ricoh FT7060 Field Service Manual

8. Lens Drive Wire Replacement

1. Remove the
2. Remove the
panel.
3. Remove the lens housing cover (3 screws) and the drum cover (2
screws).
4. Remove the main switch [A] (2 screws).
Using a flat blade screwdriver, turn the front mirror shift pulley [B]
5.
counterclockwise.
6. Remove the mirror shift wire [D] and magnification ratio adjusting ring
[D].
7. Remove the left support bracket [E] (2 screws) and the top unit release
lever assembly [F] (3 screws). (It is all right to let them hang from the
wires.)
8. Remove the harnesses [G] from the three twist clamps [H]
nect the three connectors from their respective terminals
lens drive unit.
upper front cover.
top front cover, exposure glass, original tray, and operation
Insert the stopper pin [C] into the hole.
3-17
12 July '86
and discon-
around the