Pick-Off Pawl Unit Removal - Ricoh FT7060 Field Service Manual

12 July '86

22. Pick-off Pawl Unit Removal

WARNING: Be careful not to cut yourself on the sharp edges of the pick-off pawls.
1. While holding the pick-off pawl shaft [A], pull the pick-off pawl release
lever [B] to remove the assembly.
2. Clean the pick-off pawls with a dry cloth or replace them if neces-
sary.
3. Check that the up and down movement of the pick-off pawls is smooth
by rotating the pick-off pawl release lever in the direction of the arrow
(clockwise).
3-36