Software Reset - Ricoh D009 Service Manual

018 SRM Clear
019 LCS Clear
020 Web Uapli
021 ECS
4. Press Execute, and then follow the prompts on the display to complete the procedure.
5. Make sure that you perform the following settings:
Do the laser beam pitch adjustment (
Do the printer and scanner registration and magnification adjustments (
p.4-97/ p.4-101).
Do the touch screen calibration (
Referring to the SMC data lists, re-enter any values, which had been changed
from their factory settings.
Do SP 3-001-2 (ID Sensor Initial Setting).
6. Check the copy quality and the paper path, and do any necessary adjustments.

5.3.5 SOFTWARE RESET

The software can be reboot when the machine hangs up. Use the following procedure.
Turn the main power switch off and on.
-or-
Press and hold down
release both buttons. After "Now loading. Please wait" is displayed for a few seconds the
copy window will open. The machine is ready for normal operation.
SM
Initializes the SRM (System Resource Manager)
settings.
Initializes the LCS (Log Count Service) settings.
p.4-29).
p.4-104).
together for over 10 seconds. When the machine beeps once
5-11
Using SP Modes
D009/D011/D012/D013/D091/D092