Ricoh D009 Service Manual page 470

System SP Table-3
003 Vsdp
004 Vsm/Vsg
3902*
New PCU Detection (Not used)
On/OFF Setting
001
Turns on or off the new unit detection for the transfer belt unit and fusing
unit.
Hot Roller Stripper Cleaning
3905*
"Cleaning A": 15 sec. off/on cycle for the fusing motor.
"Cleaning B": Off (45 sec.) and On (15 sec.) cycle for the fusing motor.
1st Cleaning: Interval
Sets the threshold for the 1st cleaning mode.
001
"Cleaning A" is done once.
[0 to 5 / 5 / 1 sheets]
1st Cleaning: Mode Setting
002
Sets the number of additional execution times of the 1st cleaning mode.
[0 to 5 / 0 / 1 times]
2nd Cleaning: Interval
Sets the threshold for the 2nd cleaning mode.
003
"Cleaning A" is done twice.
[6 to 49 / 30 / 1 sheets]
D009/D011/D012/D013/D091/D092
[0 to 5 / 0 / 0.1]
[0 to 5 / 0 / 0.1]
[0 to 1 / 0 / 1]
0: On, 1: Off
4-38 SM Appendix