2.18.2 INSTALLATION PROCEDURE
Unplug the machine power cord before starting the following procedure.
For installing the tray heater in the D351 (Two-tray paper feed unit)
1.
Remove the rear cover of the mainframe (
2.
Pull out the two trays from the optional paper feed unit.
3.
Install the tray heater [1] in the optional paper feed unit (
4.
Remove the two securing brackets [2] (
optional paper feed unit (
SM
Tray Heater (Optional Paper Feed Unit)
x 6).
x 1 each), and then the rear cover [3] of the
x 2).
2-67
x 1).
D009/D011/D012/D013/D091/D092