Ricoh D009 Service Manual page 968

Bit Switches
3rd paper feed station usage
for fax printing
2
0: Enabled
1: Disabled
4th paper feed station usage
for fax printing
3
0: Enabled
1: Disabled
LCT usage for fax printing
4 0: Enabled
1: Disabled
5-7 Not used
Printer Switch 03 [SP No. 1-103-004]
No FUNCTION
Length reduction of received
data
0
0: OFF
1: ON
1-3 Not used
Page separation setting when
sub scan compression is
4-7 forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
D346
used for the Specified Cassette Selection
feature.
Do not change the settings.
COMMENTS
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits
4 to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
Do not change the settings
Page separation threshold (with reduction
disabled with switch 03-0 above).
For example, if this setting is set to "10", and A4 is
the selected paper size:
If the received document is 10 mm or less longer
than A4, then the 10 mm are cut and only 1 page
prints.
If the received document is 10 mm longer than A4,
78 SM