Ricoh D009 Service Manual page 573

5850*
Address Book Function Japan Only
Replacement of Circuit Classification
The machine is sold ready to use with a G3 line. This SP allows you to
003
switch all at once to convert to G4 after you add a G4 line. Conversely, if for
some reason the G4 line becomes unusable, you can easily switch back to
G3.
Bluetooth
5851*
Sets the operation mode for the Bluetooth Unit. Press either key.
[0: Public] / [1: Private]
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM
onto the hard disk. Then these stamps can be used by the system. If this is
5853
not done, the user will not have access to the fixed stamps ("Confidential",
"Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting
the HDD. Always switch the machine off and on after executing this SP.
5856 Remote ROM Update
When set to "1" allows reception of firmware data via the local port (IEEE
1284) during a remote ROM update. This setting is reset to zero after the
machine is cycled off and on. Allows the technician to upgrade the firmware
002 using a parallel cable
[0 to 1 / 0 / 1 step]
0: Not allowed
1: Allowed
SM Appendix 4-141 D009/D011/D012/D013/D091/D092
System SP Table-5