Ricoh D009 Service Manual page 595

FIN (EUP) OUPUT Check
6145
Display the signals received from sensors and switches of the (booklet)
finisher. (B804/B805) (
6148* Jogger Fine Adjustment Not used
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 LEF
006 A5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 HLT LEF
012 Other
Max. Pre-Stack Sheet
This SP sets the number of sheets sent to the pre-stack tray.
6149*
You may need to adjust this setting or switch it off when feeding
thick or slick paper.
SM Appendix
p.4-249 "Output Check")
This SP corrects the distance between the output
jogger fence and the sides of the stack.
+ Value:
Increases the distance between the output jogger
fence and the sides of the stack.
- Value:
Decreases the distance between the output
jogger fences and the sides of the stack.
[-1.5 to 1.5 / 0 / 0.5 mm]
[0 to 3 / 3 / 1 sheets step]
4-163 D009/D011/D012/D013/D091/D092
System SP Table-6