When Installing A New Iob; Psu - Ricoh D009 Service Manual

Electrical Components

When installing a new IOB

The IOB is identical for the D009/D011/D012/D013. However, the DIP switches
are set differently for each machine. Set the DIP switches on the new IOB board to
the same settings as the old board.
1. Set the bit switches on the new IOB to the same settings as the old IOB.

4.16.7 PSU

1. Left cover ( p.4-4)
2. PSU [A] ( x 4,
3. Three clamps [B] (These clamps will be used for the new PSU.)
D009/D011/D012/D013/D091/D092
x all)
4-94 SM