Using Sp Modes; Test Pattern Printing - Ricoh D009 Service Manual

5.3 USING SP MODES

5.3.1 TEST PATTERN PRINTING

Always print a test pattern to confirm correct operation of the machine.
1. Enter the SP mode and select SP2-109 (Printing) or SP4-417 (IPU).
2. Enter the number for the test pattern that you want to print and press
tables below.)
3. When you are prompted to confirm your selection, press "OK". This selects the test
pattern for printing.
4. Press Copy Window to open the copy window and then select the settings for the test
print (paper size, etc.)
5. Press Start twice. (Ignore the "Place Original" messages) to start the test print.
6. Press SP Mode (highlighted) to return to the SP mode display.
Test Pattern Table (SP2-109-001: Printing test pattern)
No. Test Pattern
0 None
1 Vertical Line (1-dot)
2 Vertical Line (2-dot)
3 Horizontal Line (1-dot)
4 Horizontal Line (2-dot)
5 Grid Vertical Line
6 Grid Horizontal Line
7 Grid Pattern Small
8 Grid Pattern Large
9 Argyle Pattern Small
10 Argyle Pattern Large
SM
No. Test Pattern
13 Independent Pattern (4-dot)
14 Trimming Area
15 Hound's Tooth Check (Vertical)
16 Hound's Tooth Check (Horizontal)
17 Black Band (Horizontal)
18 Black Band (Vertical)
19 Checker Flag Pattern
20 Grayscale (Vertical Margin)
21 Grayscale (Horizontal Margin)
22 Two Beam Density Pattern
23 Full Dot Pattern
5-5 D009/D011/D012/D013/D091/D092
Using SP Modes
. (See the