Anti-Condensation Heater (Scanner); Installation Procedure - Ricoh D009 Service Manual

Anti-Condensation Heater (Scanner)

2.16 ANTI-CONDENSATION HEATER (SCANNER)

2.16.1 INSTALLATION PROCEDURE

1. Remove the ARDF or platen cover (see "ARDF" or "Platen Cover" in the "Installation"
section.)
2. Rear cover (
3. ARDF exposure glass and exposure glass with left scale (
4. Scanner rear frame (
5. Move the scanner carriage [1] to the right side by rotating the scanner motor.
6. Install the heater [2] in the scanner unit (
7. Put the cable through the cutout [3].
8. Release the heater relay cable [4] (
D009/D011/D012/D013/D091/D092
p.4-4)
p.4-13).
x 2, x 1)
x 1).
2-62
p.4-9).
SM