Ricoh D009 Service Manual page 147

Rev. 03/09/2012
[a]: "ROM Number/Firmware Version" – "HDD Format Option"
⇒
[b]: "Loading Program" – "GW5a_zoffy"
Diagnostic Report:
⇒
DataOverwriteSecurity
Unit
⇒
12. Go into the User Tools mode, and select System Settings> Administrator Tools> Auto
Erase Memory Setting> On.
13. Exit the User Tools mode.
14. Check the display and make sure that the overwrite erase icon [1] shows.
15. Make a Sample Copy.
16. Check the overwrite erase icon.
The icon [2] changes to [3] when job data is stored in the HDD.
The icon goes back to its usual shape [2] after this function has completed a data
overwriting in the HDD.
SM
"ROM No. / Firmware
Version" [a]
HDD Format Option:
D3775912A / 1.01m
2-101
Controller Options
"Loading Program" [b]
GW2a_zoffy:
D3775912A / 1.01m
D009/D011/D012/D013/D091/D092