Service Program Mode Tables; Service Table Key - Ricoh D009 Service Manual

5.1.2 SERVICE PROGRAM MODE TABLES

Please note these general changes in this section:
Group 8(Data Log 2) is a new group of counters.
Along with the addition of Group 8, many of the Group 7 counters have been removed.

Service Table Key

Notation
[range / default / step]
*
MS
CS
DFU
Japan only
D009/D011
D012/D013
D091
D092
SSP
SM
What it means
Example: [-9 to +9 / 0 / 0.1 mm step]. The setting can be
adjusted in the range ±9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with
each key press.
Value stored in NVRAM. After a RAM reset, this default value
(factory setting) is restored.
Monochrome Scanner Model: D009/D012
Color Scanner Model: D011/D013/D091/D092
Denotes "Design or Factory Use". Do not change this value.
The feature or item is for Japan only. Do not change this
value.
40 cpm: D009/D011
50 cpm: D012/D013
D091
D092
This denotes a "Special Service Program" mode.
5-3
Service Program Mode
D009/D011/D012/D013/D091/D092