Rev. 03/09/2012
Never touch the drum surface with bare hands.
Re-installation
1.
Replace the drum and close the PCDU (
2.
Put the opening cap [A in the previous procedure] back in its original place.
⇒
3.
Step 3 has been removed.
⇒
4.
Step 4 has been removed
⇒
5.
After replacing the drum, do these SPs:
SP 3001-2: ID sensor initial setting
SP 2810-1: Grayscale Setting
SM
x 2).
4-35
D009/D011/D012/D013/D091/D092
PCDU