Ricoh D009 Service Manual page 534

System SP Table-5
Free Run
Performs a free run on the copier engine.
The correct paper should be loaded in the 1st tray or 2nd tray, but paper is
5802*
not fed.
The main switch has to be turned off and on after using the free run mode
for a test.
001 TRAY1:A4LEF
002 TRAY2:A3
003 TRAY2:A4SEF
Input Check
5803
Displays the signals received from sensors and switches.
( p.4-236 "Input Check")
Output Check
5804
Turns on the electrical components individually for test purposes. (
p.4-249 "Output Check")
SC Reset
5810
Fusing SC Reset
Machine No. Setting (DFU)
This SP presents the screen used to enter the 11-digit number of the
5811*
machine. The allowed entries are "A" to "Z" and "0" to "9". The setting is
done at the factory, and should not be changed in the field.
D009/D011/D012/D013/D091/D092
-
-
-
Resets all level A service call conditions, such as
fusing errors. To clear the service call, touch
"Execute" on the LCD, then turn the main power
switch off/on.
Code Set
4-102 SM Appendix