Sp3-Xxx (Tel Line Settings) - Ricoh D009 Service Manual

Dump
004 G4 Memory Dump
G3-1 NCU Parameters
103
001 – 023 CC, 01 – 22
G3-2 NCU Parameters
104
001 – 023 CC, 01 – 22
G3-3 NCU Parameters
105
001 – 023 CC, 01 – 22

4.2.3 SP3-XXX (TEL LINE SETTINGS)

3 Mode No.
Service Station
101
001 Fax Number
002 Select Line
Serial Number
102
000
103 PSTN-1 Port Settings
001 Select Line
PSTN Access
002
Number
SM
board.
Not used
NCU parameter settings for the standard G3
board. "NCU Parameters"
NCU parameter settings for the optional G3
board. "NCU Parameters"
NCU parameter settings for the optional G3
board. "NCU Parameters"
Function
Enter the fax number of the service station.
Select the line type.
Enter the fax unit's serial number.
Select the line type setting for the G3-1 line. If
the machine is installed on a PABX line, select
"PABX", "PABX(GND)" or "PABX(FLASH)".
Enter the PSTN access number for the
G3-1 line.
47
Service Tables
D346