Seal Check And Removal; Installation Procedure - Ricoh D009 Service Manual

Controller Options

Seal Check and Removal

You must check the box seals to make sure that they were not removed after the
items were sealed in the box at the factory before you do the installation.
1. Check the box seals [1] on each corner of the box.
Make sure that a tape is attached to each corner.
2. Open the box.

Installation Procedure

1. For models which have the VM card, do the followings:
Press "User Tools" button to enter the User Tools mode.
Press "Extended Feature Settings" on the LCD.
D009/D011/D012/D013/D091/D092 2-94 SM