Ricoh D009 Service Manual page 218

Transfer
6. Lay the transfer belt with rollers on a flat clean surface, and fold the unit [E] to release
the tension on the belt (
7. Transfer belt [F]
Avoid touching the transfer belt surface.
Before installing the new transfer belt, clean all the rollers and shafts with
alcohol to prevent the belt from slipping.
When reinstalling the transfer belt, make sure that the belt is under the pin [F].
To avoid damaging the transfer belt during installation, manually turn the
rollers and make sure that the new transfer belt is not running over the edges
of any of the rollers.
D009/D011/D012/D013/D091/D092
x 2).
4-48 SM