Zte ZXR10 Command Manual page 46

ZXR10 Command Manual (IPv6 Volume)
Instructions
Defaults
Example
34 Confidential and Proprietary Information of ZTE CORPORATION
static
rip
ospf
isis
connected
bgp
database
This command is supported after the platform version 4.6.02.
The show ipv6 route [{static | rip | ospf | isis | connected |
bgp}] command is used to display the best valid abbreviate rout-
ing table of the specified protocol type or all types.
The show ipv6 route {X:X::X:X / <0-128>| X:X::X:X} com-
mand with the mask length is used to display detailed information
about routes matching exactly the specified destination network
ID and mask length. The command without the mask length is
used to display detailed information about routes matching the
destination network ID to the greatest extent.
The show ipv6 route database is used to display the abbreviate
routing table of all types.
This command is disabled by default.
1. This example shows the output of the show ipv6 route com-
mand.
ZXR10(config)#show ipv6 route
IPv6 Routing Table
Codes: C - connected, S - static, R - RIP, B - BGP,
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea,
IS – ISIS static,
O - OSPF intra, OI - OSPF inter, E1 - OSPF ext 1,
E2 - OSPF ext 2
Timers: Uptime
C ::1/128
via ::, loopback0, 03:33:53
S 200::/10 [100/0]
via 2000::1, fei_4/6, 00:00:40
C 2000::/64
via ::, fei_4/6, 03:25:13
The descriptions of the displayed information are shown below.
Field
03:33:53
C
200::/10
Static Route
RIPNG route
OSPF V3 route
ISIS route
Connected route
BGP+ route
Data of the routing table
Description
Time the route is added into the routing
table or modified
Route type: C: directly connected; S:
static; R: RIP; B:BGP; I1: ISIS Level 1;
I2: ISIS Level 2; IA: inter-ISIS-area;
IS: ISIS static; O: intra-OSPF-area; OI:
inter-OSPF-area; E1: OSPF external type
1; E2: external type 2
Destination network ID and mask length