Redistribute; Router-Leak - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
ZXR10(config-router)#address-family ipv6
ZXR10(config-router-af)#multi-topology

redistribute

Use this command to redistribute the protocol route. Use the no
form of this command to cancel the redistribution.
Router configuration
redistribute {{bgp | connected | ospf | rip | static}[[level-1
| level-2 | level-1-2]| metric <0~63>|[ external | internal]]}
no redistribute {{bgp | connected | ospf | rip | static}[[lev
el-1 | level-2 | level-1-2]| metric <0~63>|[ external | inter
nal]]}
bgp | connected |
ospf | rip | static
metric <0~63>
external | internal
level-1 | level-2 |
level-1-2
This command is disabled by default.
This command is supported after platform version 4.6.02.
This example describes how to configure the redistribution of BGP
routes and then remove the redistributed BGP routes.
ZXR10(config)#router isis
ZXR10(config-router)#address-family ipv6
ZXR10(config-router-af)#redistribute bgp
ZXR10(config-router-af)#no redistribute bgp

router-leak

Use this command to configure the route information leak from
IS-IS level-2 to level-1.
IPv6 address family configuration
route-leak level-2 into level-1 {metric | route-map}
no route-leak level-2 into level-1 {metric | route-map}
metric
route-map
Confidential and Proprietary Information of ZTE CORPORATION
Route source, it can be static, connected or it
is from other protocol
Metric value, range: 0~63, default: 10
Route type, external or internal, default:
external
Redistribution range, level-1. level-2, or
level-1–2, default: level-2
Metric value, range: 0~4261412864
Route map
Chapter 5 IS-ISv6 Protocol
79