Show Ipv6 Interface Brief - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Field
Bandwidth
inet6 5ffe::1/64
[duplicate]
DAD attemps number:
ND router
advertisements are
sent every x second
ND next router
advertisement due
in x seconds
ND router
advertisements live
ND advertised
reachable time
ND advertised retrans
timer

show ipv6 interface brief

Use this command to show brief information about the IPv6 inter-
face.
All modes
show ipv6 interface [<interface-name>] brief
<interface-name>
This command is supported after the platform version 4.6.02.
This command displays the status, address and address status of
the interface.
This example describes how to show brief information about the
interface fei_3/1.
ZXR10#show ipv6 interface fei_3/1 brief
fei_3/1
5ffe::3
fe80::2d0:d0ff:fec0:9a41
600::1
5ffe::1 [duplicated]
The descriptions of the displayed information are shown below.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 IPv6 Basic Protocols
Description
Bandwidth of the interface
Address of the interface, length of the prefix,
and address status: Duplicate: duplicate
address, which means there is another node
adopting the address. Tentative: Temporary
address, which means DAD is not completed.
Nothing displayed means the interface is
available
The number of NS packets sent on the
interface for DAD
The interface is allowed to send router
advertisements in the specified rate
The interface is allowed to send router
advertisements due in x seconds
Valid time of the router advertisement
Reachable time in the router advertisement
Value of the retransmission timer in the router
advertisement
Name of the interface to be displayed
[up/up]
31