Neighbor Advertisement-Interval; Neighbor Allowas-In - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
neighbor advertisement-inte
rval
Use this command to configure the minimum time interval to ad-
vertise the route change originated from non-local AS. Restore
default for the time interval with the no form of this command.
Router configuration, IPv4 vrf address family configuration
neighbor [<ipv4-address>|<ipv6-address>|<peer-group-nam
e>] advertisement-interval <value>
no neighbor [<ipv4-address>|<ipv6-address>|<peer-group-na
me>] advertisement-interval
<ipv4-address>
<ipv6-address>
<peer-group-name>
<second>
This example describes how to configure the minimum time inter-
val for advertising route changes originated from non-local AS to
the BGP neighbor 1.1.1.1 as 20 seconds.
ZXR10(config)#router bgp 1
ZXR10(config-router)#neighbor 1.1.1.1 advertisement-interval 20

neighbor allowas-in

Generally, when the update message is received, if the path at-
tribute contains its own AS number , the route will be considered
invalid. This command is used to make the route still valid when
the path attribute has several its own AS numbers. Restore de-
fault with the no form of this command.
Router configuration and address family configuration
neighbor [<ipv4-address>|<ipv6-address>|<peer-group-nam
e>] allowas-in [<value>]
no neighbor [<ipv4-address>|<ipv6-address>|<peer-group-na
me>] allowas-in
<ipv4-address>
<ipv6-address>
Confidential and Proprietary Information of ZTE CORPORATION
Neighbor IPv4 address, in the dotted decimal
format
Neighbor IPv6 address
Peer group name
Time interval in seconds, range: 1~600,
default: 30 seconds
Neighbor IPv4 address, in the dotted decimal
format
Neighbor IPv6 address
Chapter 6 BGP4+ Protocol
99