Show Ipv6 Ospf Database - Zte ZXR10 Command Manual

Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
This example describes how to display information about OSPF
process 1.
ZXR10#show ipv6 ospf 1
Routing Process "OSPFv3 (1)" with ID 156.1.1.1
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSA 1. Checksum Sum 0x7E15
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 4
Number of LSA received 8
The number of ospfv3 routes is 4
Number of areas in this router is 2
Area BACKBONE(0)
Number of interfaces in this area is 1
SPF algorithm executed 0 times
Number of LSA 0.
Number of Unknown LSA 0
Area 0.0.0.3
Number of interfaces in this area is 1
SPF algorithm executed 3 times
Number of LSA 6.
Number of Unknown LSA 0

show ipv6 ospf database

Use this command to display information about the database of
OSPFv3 instances.
All modes
show ipv6 ospf database [<process-id>][<lsa-type>][adv-ro
uter <router-id>]
<lsa-type>
<process-id>
<router-id>
Use the show ipv6 ospf database command to show information
about all lsa databases.
This example describes how to show information about all OSPFv3
databases.
ZXR10#show ipv6 ospf database
OSPFv3 Router with ID (156.1.1.1) (Process 1)
Link-LSA (Interface fei_3/1)
Confidential and Proprietary Information of ZTE CORPORATION
Checksum Sum 0x0000
Checksum Sum 0x3A839
Lsa type displayed independently:
router: router-lsa
network: network-lsa
inter-prefix: inter-area-prefix-lsa
inter-router: inter-area-router-lsa
external: as-external-lsa
link: link-lsa
intra-prefix: inter-area-prefix-lsa
OSPFv3 process identifier, range: 1~65535
Router identifier for advertising lsa in IP
address format
Chapter 4 OSPFv3 Protocol
63