Show Ipv6 Rpf - Zte ZXR10 Command Manual

ZXR10 Command Manual (IPv6 Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
156 Confidential and Proprietary Information of ZTE CORPORATION
Field
Register
Register Stop
Assert
Malformed Packets
Bad Checksums
Send Errors
Packets Received on
PIM-disabled Interface
Packets Received with
Unknown PIM Version

show ipv6 rpf

Use this command to display the check result of multicast IPv6 rpf
.
All modes
show ipv6 rpf [address <ipv6-addr>]
<ipv6-addr>
The description of command information is shown below.
Field
RPF interface
RPF neighbor
RPF type
Metric preference
Metric
Description
Number of the received/sent register packets
Number of the received/sent register stop
packets
Number of the received/sent assert packets
Number of malformed pim packets sent
Number of sent pim packets with wrong
checksums
Number of pim packets wrongly sent
Number of packets received on PIM-disabled
Interface
Number of packets received with unknown
PIM version
RP address or source address, X:X::X:X
Description
Rpf interface
Rpf neighbor, with three types: local, direct
connected, normal
Rpf type, unicast
Metric priority
Metric value