Show Isis Ipv6 Rib - Zte ZXR10 Command Manual

Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
l1 | l2 | level-1 |
level-2
detail | verbose
This command is supported after platform version 4.6.02 .
This example describes how to display IS-ISv6 level-1 database
information.
ZXR10#show isis database detail level-1
Area (null):
IS-IS Level-1 Link State Database:
LSPID LSP Seq Num
1111.1111.1111.00-00* 0x0000003F
Area Address: 26
NLPID: 0x8E
Metric: 10
1111.1111.1111.01-00* 0x00000038
Metric: 0
Metric: 0
2626.2626.2626.00-00
Area Address: 26
NLPID: 0x8E
Metric: 10
show isis topology

show isis ipv6 rib

Use this command to display IS-IS IPv6 local routing table.
All modes
show isis ipv6 rib [summary]
summary
Platform version 4.6.02 and upgrade versions support this com-
mand.
This example describes how to display IS-IS IPv6 local routing
table.
ZXR10(config-router)#show isis ipv6 ribs
IS-IS Local IPv6 Routing Table -
Codes: I1 - ISIS L1, I2 - ISIS L2
I1 77::/64 [1/20]
via fe80::2d0:d0ff:fec4:1a01,vlan770
There are totally 1 routes.
Confidential and Proprietary Information of ZTE CORPORATION
Database level
Shows detailed information of the database.
LSP Checksum LSP Holdtime ATT/P/OL
0x3DD5
IS 1111.1111.1111.01
0xFEF6
IS 1111.1111.1111.00
IS 2626.2626.2626.00
0x0000027F 0x4D89
IS 1111.1111.1111.01
Routing item
Chapter 5 IS-ISv6 Protocol
463 1/0/0
456 0/0/0
878 1/0/0
81