ZXR10 Command Manual (IPv6 Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
104
Confidential and Proprietary Information of ZTE CORPORATION
neighbor originate-interval
Use this command to configure the minimum time interval to ad-
vertise the route change originated from local AS. Restore the de-
fault time interval with the no form of this command.
Router configuration and address family configuration
neighbor
[<ipv4-address>|<ipv6-address>|<peer-group-nam
e>] originate-interval <value>
no neighbor [<ipv4-address>|<ipv6-address>|<peer-group-na
me>] originate-interval
<ipv4-address>
<ipv6-address>
<peer-group-name>
<second>
This example describes how to configure the minimum interval
for advertising route changes originated from local AS to the BGP
neighbor 1.1.1.1 as 5 seconds.
ZXR10(config)#router bgp 1
ZXR10(config-router)#neighbor 1.1.1.1 originate-interval 5
neighbor passive
Use this command to make neighbors establish links in passive
mode. Disable the authentication with the no form of this com-
mand.
Router configuration and address family configuration
neighbor
[<ipv4-address>|<ipv6-address>|<peer-group-nam
e>] passive
no neighbor [<ipv4-address>|<ipv6-address>|<peer-group-na
me>] passive
<ipv4-address>
<ipv6-address>
<peer-group-name>
This command is disabled by default.
This example describes how to make BGP neighbor 2000::1 es-
tablish links passively.
ZXR10(config)#router bgp 1
Neighbor IPv4 address, in dotted decimal
format
Neighbor IPv6 address
Peer group name
Time interval in seconds, range: 1~600,
default: 15 seconds
Neighbor IPv4 address
Neighbor IPv6 address
Peer group name