Check The Exhaust System - Genie ZX-135/70 Service Manual

Service Manual
Checklist B Procedures
Cooling and blower fins:
5 Inspect the fan blower fins for physical
damage.
6 Clean the fan blower fins of debris and foreign
material.
7 Using a flashlight, inspect the head cooling
passages and fins for physical damage or
foreign material.
8 If needed, clean the cylinder head cooling
passages and fins of debris and foreign
material.
9 Install the engine side cover and tighten the
retaining fasteners.
36
B-6

Check the Exhaust System

Genie specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Maintaining the exhaust system is essential to
good engine performance and service life.
Operating the engine with a damaged or leaking
exhaust system can cause component damage
and unsafe operating conditions.
1 Remove the engine pivot plate retaining
fastener. Swing the engine pivot plate out
away from the machine.
1 engine pivot plate anchor hole
2 engine pivot plate retaining fastener
ZX-135/70
August 2014
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components.
Contact with hot engine
components may cause severe
burns.
Part No. 218700